Kroky
1. Vložte knoflíkovou baterii tak, aby znaménko „+“ směřovalo nahoru, a zasuňte ji pod bezpečnostní svorky na kladné straně konektoru.
2. Zatlačte baterii směrem dolů do konektoru tak, aby zapadla na své místo.
Další kroky
1. Nainstalujte sestavu ventilátoru.
2. Namontujte čelní kryt.
3. Namontujte horní kryt
4. Postupujte podle pokynů v části Po manipulaci uvnitř počítače.
paměťové moduly,
Removing the memory modules
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover (side bezel).
4. Remove the front bezel.
5. Remove the fan assembly.
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch the
components on the memory module.
Demontáž a opětovná montáž 45