About this task
The following image indicates the location of the front bezel and provides a visual representation of the installation procedure.
Steps
1. Position the bezel to align the tabs with the slots on the chassis.
2. Press the bezel until the release tabs click into place.
Next steps
1. Install the side cover.
2. Install the top cover (side bezel).
3. Follow the procedure in after working inside your computer.
Sestava pevného disku
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the top cover (side bezel).
4. Remove the front bezel.
Demontáž a opětovná montáž
31
To Next Page
Loading...
