3–Adapter Management Applications
Linux Management Applications
108 CU0354602-00 L
lro_pkts: 0
rx_bytes: 0
tx_bytes: 468
lrobytes: 0
lso_frames: 0
xmit_on: 0
xmit_off: 0
skb_alloc_failure: 0
null skb: 0
null rxbuf: 0
rx dma map error: 0
In the following example, ethtool eth[n] lists interface settings.
Sample Output 2:
Ethtool eth8
Settings for eth8:
Supported ports: [ TP FIBRE ]
Supported link modes:
Supports auto-negotiation: No
Advertised link modes: 10000baseT/Full
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: FIBRE
PHYAD: 1
Transceiver: external
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000000 (0)
Link detected: yes
User Diagnostics for Linux NIC Driver Management
Applications
This section covers the following information for user diagnostics for Linux NIC
driver management applications:
Running Linux User Diagnostics
Linux Diagnostic Test Descriptions
Linux Diagnostic Test Messages
To Next Page
Loading...