1–Hardware Installation
Connecting to the Network
3 CU0354602-00 L
7. Close the computer cover.
8. Plug the Ethernet cable into the adapter.
9. Plug in the power cable and turn on the computer.
For more detailed information, refer to the Hardware Owner’s Manual for your Dell
PowerEdge server.
Connecting to the Network
Follow the instructions for your adapter.
QMD8262-k, QME8262-k
Refer to the “Guidelines for Installing I/O Modules” section of the Dell PowerEdge
Modular Systems Hardware Owner’s Manual:
ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/po
weredge-m610x_Owner%27s%20Manual_en-us.pdf
QLE8262
Refer to the Hardware Owner’s Manual for your Dell PowerEdge server.
To Next Page
Loading...