2–Driver Installation and Configuration
Windows Driver Installation and Configuration
13 CU0354602-00 L
The following is the syntax for specifying options to customize the DUP installation
behavior:
<DUP_file_name>.exe [/<option1>[=<value1>]]
[/<option2>[=<value2>]]...
To display the GUI for guided installation, update, or extraction, use no options.
Options
The following options can be used to customize the DUP installation behavior.
To update the DUP usage information:
/? or /h
To suppress the DUP GUI:
/s
To extract update contents to a directory:
/e=<path>
To extract only the driver components to a directory:
/drivers=<path>
To install/update only the driver components:
/driveronly
(Advanced) This command sends all text following the /passthrough option
directly to the QLogic installation software of the DUP. This mode suppresses any
provided GUI but not necessarily those of the QLogic software.
/passthrough
This command requires the /s option.
This command requires the /s option.
This command requires the /s option.
To Next Page
Loading...