Dell QMD8262-k

3–Adapter Management Applications
General Management with QConvergeConsole
59 CU0354602-00 L
(router may override)
IPv6_ND_Reachable_Timer IPV6NDRT 0 to 4294967295
(router may override)
IPv6_DAD_Count IPV6DAD 0 to 255
Summary of Target Sessions
Use the -ts command to display summary information for both persistent and
non-persistent targets. Both [hba_port_inst] and [target_id] are optional
parameters. If neither of the parameters is present, the information is displayed for
all adapters and all targets. When hba_port_inst is entered, target information
for all targets on the specified adapter is displayed. If the optional target_id
keyword is entered, only information on the specified target is displayed.
Command line options:
-ts [hba_port_inst] [target_id]
Example:
$qaucli -pr iscsi -ts
Or:
$qaucli -iscsi -ts
Target ID: 2 hba_no: 0 IP: 192.168.105.247 Port: 3260 TGT
Instance #: 2
ISCSI Name:
Alias:
State: No Connection
Target ID: 3 hba_no: 0 IP: 192.168.105.247 Port: 3260 TGT
Instance #: 3
ISCSI Name:
iqn.2003-05.com.stringbeansoftware:apptester-starblazer248-target
Alias:
State: Session Active
Target ID: 2 hba_no: 1 IP: 192.168.105.247 Port: 3260 TGT
Instance #: 2
ISCSI Name:
iqn.2003-05.com.stringbeansoftware:apptester-appstorm245-target
Alias:
State: Session Active
Target ID: 3 hba_no: 1 IP: 192.168.105.247 Port: 3260 TGT
Instance #: 3
ISCSI Name:
iqn.2003-05.com.stringbeansoftware:apptester-starblazer248-target
Alias:
State: Session Active