Dell QMD8262-k

3–Adapter Management Applications
General Management with QConvergeConsole
60 CU0354602-00 L
Target Session-Level iSCSI Negotiated Parameters
Use the -t command to display information for targets. The positional parameter
is <hba_port_inst>. The optional parameter is [target_id]. If only the
hba_port_inst is entered, target information for all targets on the specified
adapter is displayed. If the optional target_id is entered, only information on
the specified target is displayed.
Command line options:
-t <hba_port_inst> [target_id]
Example:
In the following examples, the HBA port instance is 0, and the target ID is 3.
$qaucli -pr iscsi -t 0 3
Or:
$qaucli -iscsi -t 0 3
Target ID: 3 hba_no: 0 IP: 192.168.105.247 Port: 3260 TGT
Instance #: 3
ISCSI Name:
iqn.2003-05.com.stringbeansoftware:apptester-starblazer248-target
Alias:
State: Session Active
TGT_iSCSI_Name :
iqn.2003-05.com.stringbeansoftware:apptester-starblazer248-target
TGT_Target_ID : 3(*)
TGTO_Active : off(*)
TGTO_Access_Granted : off(*)
TGTO_Target_Entry : on(*)
TGTO_Initiator_Entry : off(*)
TGT_RetryCount : 0(*)
TGT_RetryDelay : 0(*)
TGT_DevType : 0(*)
TGT_ExeThrottle : 0
TGT_FirstBurstLen : 32
TGTIPO_Fragmentation : on(*)
TGTISCSIO_Force_Neg_Main_Keys : off
TGTISCSIO_Send_Markers : off(*)
TGTISCSIO_Header_Digests : off
TGTISCSIO_Data_Digests : off
TGTISCSIO_Immediate_Data : on
TGTISCSIO_Initial_R2T : off
TGTISCSIO_Data_Sequence_In_Order : on(*)
TGTISCSIO_Data_PDU_In_Order : on(*)
TGTISCSIO_CHAP_Authentication : off
TGTISCSIO_Bidi_CHAP_Authentication : off
TGTISCSIO_Snack : off