Dell QMD8262-k

4–Switch Independent Partitioning
Switch Independent Partitioning Setup and Management Options
155 CU0354602-00 L
To set up NIC partitions using the QConvergeConsole CLI:
1. Start the QConvergeConsole CLI interface and select 6: NIC
Partitioning <NPAR> Information (see Figure 4-18).
Figure 4-18. Selecting 6 to View NPAR Information Options
2. Select 2: NPAR Port Information (see Figure 4-19).
Figure 4-19. Selecting 2 to View NPAR Port Information