Dell QMD8262-k - Page 70

3–Adapter Management Applications
General Management with QConvergeConsole
55 CU0354602-00 L
FW_Fast_Posting : off(*)
FW_Sense_Buffer_Desc : off(*)
FW_ZIO_Enable_Mode : off
AFW_Device_Timeouts : on
AFW_Delayed_Ack : off
AFW_AutoConnect : on
*** Displaying Device Settings inst=0 ***
Large_Frames : off
DevType : 0(*)
ExeThrottle : 0
FirstBurstLen : 32
KeepAliveTO : 30
DefaultTime2Retain : 20(*)
DefaultTime2Wait : 2(*)
MaxBurstLen : 512
MaxOutstandingR2T : 1
MaxRxDataSegmentLen : 128(*)
Port : 3260(*)
IPv4TOS : 0
IPv4TTL : 64
*** Displaying Basic Settings inst=0 ***
iSCSI_Discovery_Logout : on
iSCSI_Strict_Login : off
TCP_DHCP : off
TCP_Nagle : off
iSCSI_Alias :
IP_Address : 192.168.105.208
IP_Subnet_Mask : 255.255.255.0
IP_Gateway : 192.168.105.178
Secondary_DNS : (*)
Secondary_IP_Address : (*)
Task_Management_Timeout : 10
ENABLE_IPV4 : on
ENABLE_IPV6 : off
LOC_LINK_AUTO : off
ROUTABLE_AUTO : off
LDROUTER_AUTO : off
IPv6_Addr_Local_link : fe80::
ENABLE_4022IPV4 : on
*** Displaying Advanced Settings inst=0 ***
FW_Marker : on(*)
FW_Stat_Alarm : off(*)
FW_Accept_AEN : off(*)
FW_Access_Control : off(*)
FW_Session_Mode : on(*)
FW_Initiator_Mode : on(*)
FW_Target_Mode : off(*)
FW_Fast_Posting : off(*)
FW_Sense_Buffer_Desc : off(*)
FW_ZIO_Enable_Mode : off
AFW_Device_Timeouts : on
AFW_Delayed_Ack : off
AFW_AutoConnect : on
DevType : 0(*)
ExeThrottle : 0
FirstBurstLen : 32