Operating the monitor | 79
Icon Menu and
Submenus
Description
USB Allow you to pair the Video input port to the USB
upstream port. So that the USB downstream devices, for
example, keyboard and mouse are assigned and can be
used with the active video.
Exit
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
DP assign to
USB-C
HDMI assign to
USB-C
Ethernet Switch Mode
Prompt when KVM switches
Ethernet Switch
Show KVM Setup Guide
Select
√
Reset USB
UltraSharp 40 Monitor
More Information
Audio
NOTE: For DP and HDMI video, connect the Computer
USB-A port to Monitor USB-C upstream port with the
USB A-C cable. There is no additional USB cable needed
for Thunderbolt
TM
video.
NOTE: To prevent data damage or loss, before changing
USB upstream ports, make sure that No USB storage
devices are in use by the computer connected to the
monitor’s USB upstream port.
To Next Page
Loading...
