EasyManua.ls Logo

Dell Thunderbolt U4025QW - Common Problems and Solutions

Dell Thunderbolt U4025QW
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
98 | Troubleshooting
Common Problems
The following table contains general information about common monitor problems that
you might encounter and the possible solutions:
Common
Symptoms
What you
experience
Possible solutions
No video/power
LED off
No picture Ensure that the video cable connecting
the monitor and the computer is properly
connected and secure.
Verify that the power outlet is functioning
properly using any other electrical
equipment.
Ensure that the power button is pressed
fully.
Ensure that the correct input source is
selected in the Input Source menu.
No video/power
LED on
No picture or no
brightness
Increase brightness and contrast controls
using OSD.
Perform monitor self-test feature check.
Check for bent or broken pins in the video
cable connector.
Run the built-in diagnostics.
Ensure that the correct input source is
selected in the Input Source menu.
Missing pixels LCD screen has spots • Cycle power on-off.
A pixel that is permanently o is a natural
defect that can occur in LCD technology.
• For more information about Dell Monitor
Quality and Pixel Policy, see Dell Support
site at:
https://www.dell.com/pixelguidelines.
Stuck-on pixels LCD screen has
bright spots
• Cycle power on-off.
A pixel that is permanently o is a natural
defect that can occur in LCD technology.
• For more information about Dell Monitor
Quality and Pixel Policy, see Dell Support
site at:
https://www.dell.com/pixelguidelines.
Brightness
problems
Picture too dim or
too bright
Reset the monitor to factory settings.
Adjust brightness and contrast controls
using OSD.

Table of Contents

Related product manuals