Removing and Installing Parts 129
Hard Drive
CAUTION: Before you perform any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set
the drive on a surface, such as a foam pad, that will sufficiently cushion it.
NOTICE: If you are replacing a hard drive that contains data, back up your files
before you begin this procedure
Removing a Hard Drive
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3
Disconnect the power and hard drive cables from the drive.
1 power cable 2 hard drive cable
2
1
book.book Page 129 Tuesday, November 27, 2007 10:29 AM
To Next Page
Loading...
