Dell XPS DC01L - Connecting a Monitor (with an Adapter)

26 Setting Up and Using Your Computer
4 Connect the DVI or VGA connector of your monitor to the appropriate
connector on the back of the computer:
To connect a monitor with a DVI connector, use the (white) DVI port on
your computer.
To connect a monitor with a VGA connector, use the (blue) VGA port on
your computer.
NOTE: To connect a monitor with a VGA connector to the DVI-I (black) port on
your computer, use a dongle.
Connecting a Monitor (With an Adapter)
CAUTION: Before you perform any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: In order to connect a monitor with a VGA connector to the DVI port on the
back of your computer, a DVI-to-VGA adapter is required.
1 Save and close all open files and exit all open programs.
2 Shut down the operating system:
• In Windows Vista,
click Start , click the arrow in the lower-right
corner of the Start menu as shown below, and then click
Shut Down .
The computer turns off after the operating system shutdown process
is complete.
book.book Page 26 Tuesday, November 27, 2007 10:29 AM