Dell XPS M1530 - Replacing the Wireless Sniffer Board

104 Wireless Sniffer Board
Replacing the Wireless Sniffer Board
1 Replace the sniffer board.
2 Replace the two M2 x 3-mm screws on each side of the sniffer board.
3 Reconnect the wireless sniffer board cable to the system board.
4 Replace the ExpressCard reader (see "Replacing the ExpressCard Reader"
on page 94).
5 Replace the palm rest (see "Replacing the Palm Rest" on page 79).
6 Reinstall the ExpressCards in the ExpressCard slot, if any.
1 wireless sniffer board 2 M2 x3-mm screw (2) 3 wireless sniffer board
cable connector
1
2
3