Keyboard 55
10
Keyboard
For more information about the keyboard, see "Using the Keyboard and
Touchpad" in your Owner’s Manual.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
Removing the Keyboard
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove the Center Control Cover and Hinge Covers (see "Removing the
Hinge Covers and Center Control Cover" on page 45).
3
Remove the two M2.5 x 5-mm screws at the top of the keyboard.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-
consuming to replace. Be careful when removing and handling the keyboard.
4
Carefully slide the keyboard toward the back of the computer.
NOTICE: Be extremely careful when removing and handling the keyboard. Failure
to do so could result in scratching the display panel.
To Next Page
Loading...
