Palm Rest 79
Replacing the Palm Rest
1
Align the palm rest with the computer base and connect the suspend
switch cable.
2
Gently snap the palm rest into place.
3
Connect the bluetooth cable, touch pad cable and the biometric cable to
the system board.
4
Replace the screw on the top of the palm rest.
5
Turn the computer upside down and replace the eleven screws in the
computer base.
6
Replace the display assembly (see "Replacing the Display Assembly" on
page 67).
7
Replace the keyboard (see "Replacing the Keyboard" on page 56).
8
Replace the internal card with Bluetooth
®
wireless technology (see
"Replacing the Card" on page 50).
9
Replace the hinge covers and center control cover (see "Replacing the
Hinge Covers and Center Control Cover" on page 47).
10
Reinstall the memory modules or Mini Cards, if any.
11
Reinstall the ExpressCards in the ExpressCard slot, if any.
To Next Page
Loading...
