60 Button Board
4
Remove the two screws securing the button board.
5
To release the button board cable, pull the black securing tabs of the cable
connector with your fingertips and ease out the cable.
6
Remove the button board from the system.
Replacing the Button Board
1
Replace the button board.
2
To reconnect the cable that attaches the button board to the system board,
place the cable inside the cable connector and push its black securing tabs
inside with your fingertips.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-
consuming to replace. Be careful when removing and handling the keyboard.
1 screw (2) 2 button board
3 button board cable 4 black securing tabs
To Next Page
Loading...
