Internal Card With Bluetooth
®
Wireless Technology 49
8
Internal Card With Bluetooth
®
Wireless Technology
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
If you ordered a card with Bluetooth wireless technology with your computer,
it is already installed.
Removing the Card
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove the center control cover (see "Removing the Hinge Covers and
Center Control Cover" on page 45).
3
Remove the bluetooth cable from its routing.
4
Pull the bluetooth card out of the box.
To Next Page
Loading...
