ExpressCard Reader 93
19
ExpressCard Reader
CAUTION: Before performing the following procedures, follow the safety
instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
computer.
Removing the ExpressCard Reader
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove any installed ExpressCards from the ExpressCard slot.
3
Remove the display assembly (see "Removing the Display Assembly" on
page 63).
4
Remove the palm rest (see "Removing the Palm Rest" on page 75).
5
Remove the three M2 x 3-mm screws that secure the ExpressCard reader
to the computer base.
To Next Page
Loading...
