Palm Rest 75
14
Palm Rest
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
Removing the Palm Rest
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove any installed ExpressCards from the ExpressCard slot.
3
Remove any installed memory modules or Mini Cards (see "Memory" on
page 17 and "Communication Cards" on page 35).
4
Remove the hinge covers and center control cover (see "Removing the
Hinge Covers and Center Control Cover" on page 45).
5
Remove the internal card with Bluetooth
®
wireless technology (see
"Removing the Card" on page 49).
6
Remove the keyboard (see "Removing the Keyboard" on page 55).
7
Remove the display assembly (see "Removing the Display Assembly" on
page 63).
8
Turn the computer upside down and remove the eleven M2.5 x 5-mm
screws from the computer base.
To Next Page
Loading...
