86 Speaker
11
Disconnect the speaker cable connector from the system board.
12
Make note of the speaker cable routing.
13
Remove the speakers.
Replacing the Speaker
1
Replace the speakers and the speaker cables.
2
Connect the speaker cable connector to the system board.
3
Replace the two speaker screws (one on each speaker) that secure the
speakers to the computer base.
4
Connect the button board cable connector to the system board.
5
Replace the palm rest (see "Replacing the Palm Rest" on page 79).
6
Replace the display assembly (see "Replacing the Display Assembly" on
page 67).
1 speaker cable
connector
2 screw (2) 3 speaker cable
routing
To Next Page
Loading...
