Dell XPS M1530 - Setting Up and Using Networks; Connecting to a Network Cable

Palm Rest 77
NOTICE: Pull on the plastic tab on top of the connectors to avoid damaging the
connectors.
10 Disconnect the bluetooth cable connector, touch pad cable connector and
the biometric cable connector from the system board.
11 Starting at the back center of the palm rest, use your fingers to gently ease
the palm rest from the computer base by lifting the inside of the palm rest
while pushing in on the outside.
12 Ease up the palm rest until you see the suspend switch cable connector.
NOTICE: Be extremely careful when easing up the palm rest. The palm rest, along
with the cable that attaches it to the computer base are very fragile.
1 screw 2 bluetooth cable connector
3 touch pad cable connector 4 palm rest
5 biometric cable connector
2
3
4
5
1