Delphi EZ-Pro 15-6 Kiln - 90 COE Pre-Programmed Firing Programs

45
90 COE Pre-Programmed Firing Programs
FUSE Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Full Fuse 1 300° F 1250° F 30 min
2 600° F 1480° F 10 min
3 Full 960° F 40 min
4 150° F 700° F --
TAC Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Tack Fuse 1 300° F 1250° F 30 min
2 400° F 1350° F 10 min
3 Full 960° F 1 hr 00 min
4 100° F 700° F --
SLP Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Slumping 1 300° F 1270° F 15 minutes
2 Full 960° F 1 hour
3 100° F 700° F --
POL Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Firepolish 1 300° F 1180° F 10 minutes
2 Full 960° F 1 hour
3 100° F 700° F --