Delta Elektronika SM15K Series User Manual

INSTALLATION SM15K
18 / 32 DELTA ELEKTRONIKA B.V. rev. January 2021
CV- CC OR CP-MODE

This indicator will indicate if a unit is operating in CV, CC or
CP mode.
CONTROLS LOCKED

This indicator is active if the rotary encoders on the front
panel are locked.
INTERNAL ERROR

This indicator is active if there is an internal error in the unit,
or when an interface is not correctly configured. Verify the
"System information" page of the web interface. Or contact
support.
INTERFACES

This indicator is active if there is an interface build inside one
of the slots at the rear side.
MASTER or SLAVE

The standard interface icon is replaced by a Master or a
Slave icon if the optional Master Slave interface is

configured as a Master or a Slave.
SEQUENCER RUNNING / PAUSE / STOP

These indicators show the status of the Sequencer.
Note: If both the interlock and watchdog indicator conditions are true,
the symbols will be displayed in an alternating way.
fig 5 - 20
Location of icons on the front display.
CV
CC
CP

Delta Elektronika SM15K Series Specifications

General

Brand	Delta Elektronika
Model	SM15K Series
Category	Power Supply
Language	English