Delta Elektronika SM15K Series User Manual

FRONT MENU OPERATION SM15K
19 / 32 DELTA ELEKTRONIKA B.V. rev. January 2021
6
FRONT MENU OPERATION
6.1
ACCESSING THE MAIN MENU

After switching on the unit, the right side of the display shows
the texts 'Menu', 'Lock' and 'on/Off' (see fig. 6 - 1). Press the
upper push button right from the text 'Menu' to enter the menu
of the unit.

Operate the left rotary encoder marked 'V' to choose one of
the sub menu's.

To change a final setting, operate the right encoder marked
'A'.

By using the upper or middle push buttons, one can
respectively go back to the previous menu level (Back) or go
deeper in the menu (Select). See below paragraphs for the
possibilities.

In every menu level, it is possible to switch the DC power
output on or off, using the lower push button.
6.2
MENU MAP

The overview in fig. 6 - 2 shows the tree structure of the main
menu. Not all items are already implemented in the present
firmware package. Regularly check the Delta Elektronika
website for new releases. The unit can be updated with the
latest package via the web interface.
6.3
MENU SETTINGS
6.3.1 SYSTEM INFO
UNIT
VERSION

Displays the version of the firmware package.
SERIALNR

Displays serial number
PUD

Displays 'Protected User Data'
STATUS
TEMPERATURE

Displays the highest temperature inside the power supply.
INPUT

Displays mains Vac and Iac
SUPERVISOR

In case of an error, more information about the location
inside the unit is shown here.

When there is no error, it shows 'system is okay'.
6.3.2 CONFIGURATION
FRONT SETTINGS
LCD SETTINGS
LIGHT ON

Select the setting of the display back light level during
operation of the rotary encoders or the push buttons.

A range of 20 - 100% is available.

The default setting is 50%.
LIGHT DIM

Select the setting of the normal display back light level.

A range of 0 - 100% is available.

The default setting is 20%.
DIM DELAY

Select the time after which the display switches back from
a high level during encoder or button operation, and the
normal back light level.

A range of 0 - 200 seconds is available (0 = do not dim).

The default setting is 5 seconds.
CONTRAST

Select the setting of the display contrast.

A range of 0 - 100% is available.

The default setting is 60%.
SYSTEM INFO
UNIT
VERSION
SERIALNR
PUD
STATUS
TEMPERATURE
INPUT
SUPERVISOR
CONFIGURATION
FRONT SETTINGS
LCD SETTINGS
INDICATORS
SOUNDS
LANGUAGE
KNOBS
POWER-ON STATE
VOLTAGE
CURRENT+
CURRENT-
POWER+
POWER-
OUTPUT
PRG SOURCE
V-SETTINGS
I-SETTINGS
P-SETTINGS
PRG SETTING
P-SETTINGS
POWER SINK
CURR- PREMISSION
MASTER SLAVE
STATUS
SETTINGS
SETUP
RECALL SETUP
SAVE SETUP
PROTECTION
ACCESS SECURITY
CHANGE KEY
LOCK OPTIONS
UNLOCK OPTIONS
LIMITS
VOLTAGE LIMIT
CURRENT+ LIMIT
CURRENT- LIMIT
POWER+ LIMIT
POWER- LIMIT
INTERFACES
LAN
ADDRESS
SUBNETMASK
GATEWAY
DHCP
IP-VERSION
MAC-ADDRESS
SLOTS
OVERVIEW
fig 6 - 2
Menu tree structure.
fig 6 - 1
At the right side of the display, the 3 main menu
items can be chosen.

Delta Elektronika SM15K Series Specifications

General

Brand	Delta Elektronika
Model	SM15K Series
Category	Power Supply
Language	English