Delta 36-6023 - Making Adjustments; Installing the Fence; Removing the Fence

MAKING ADJUSTMENTS
FIGURE 44
FIGURE 45
Removing The Fence
• Lift the blue tabs on the fence.
• Tile the fence at a slight angle.
• Remove notch on fence system from tabs on rail.
See Figure 45.
Installing the Fence
The fence can be positioned on both the left and right side of the table.
• Tilt the fence at a slight angle.
• Insert the notch on both sides of the fence system into corresponding tabs on the rail system.
• Lower the fence until it locks into place.
See Figure 44.
36 37