Delta 36-6023 - Assembly; Assembling the Stand

ASSEMBLY
D
dd
pp
aa
FIGURE 1
FIGURE 2
ASSEMBLING THE STAND
First remove washers (pp) and nuts (dd) from lower right leg assembly, then attach wheels (C) to lower right leg assembly (D)
with washers (pp) and nut (dd). Note: The hardware to attach Wheel will NOT be found with additional hardware. Hardware pp
and dd will come attached to the Lower Right Leg Assembly. Check orientation of wheels and if wheels rub against frame, reverse
orientation. Set wheel assembly aside for later use.
Attach leg cross piece (H) to left support rod (F) and right support rod (E) with M6 x 50 bolts (aa).
H
11