Delta 36-6023 - Assembly; Assembling the Stand (Continued)

FIGURE 4
F
G
E
ASSEMBLY
FIGURE 3
Attach Support Rod Connection Tube (G) onto the leg assembly from step Figure 2. Secure with M8 x 35mm (1.38”). cap screw ()
and nut (dd).
NOTE: The feet Support Rod Connection Tube (G) should face to the outside (left).
Secure Upper Stand Support Part 2 (I2) to Upper Stand Support Part 1 (pre-attached to saw) with M8 x 75 Carriage Screw (ee),
Plastic Spacer (cc), and M8 Locknut (dd).
dd
dd
cc

ee
12 13