Delta 36-6023 - Assembly; Assembling the Stand (Continued)

B
ASSEMBLY
FIGURE 5
With table still in lower packing tray, attach stand handle (B) to table with 1-3/8 in. cap screw () and nut (dd).
NOTE: Square and round holes can be aligned together.
FIGURE 6
Attach leg assembly to table. Insert spacer (cc) between legs and secure with M8 x 75mm (2.95”) carriage bolt (ee) and nut (dd).
NOTE: Cut zip tie securing the pre-assembled upper leg in place.
dd

ee
dd
cc
13