Delta 36-6023 - Assembly; Assembling the Stand (Continued)

ASSEMBLY
FIGURE 7
Install the wheel assembly from gure 1 to leg assembly installed in gure 6. Insert spacer (cc)
between legs and secure with M8 x 75mm (2.95”) carriage bolt (ee) and nut (dd).
Raise the narrowest part of the stand to help align the holes. Insert spacer (cc) between legs and secure with M8 x 75mm (2.95”)
cap screw (ee) and nut (dd).
NOTE: Do Not overtighten. Cut zip tie securing pedal.
FIGURE 8
ee
ee
dd
dd
cc
cc
14 15