Delta 36-6023 - Making Adjustments; Black Tab; Black Tab Extension

MAKING ADJUSTMENTS
FIGURE 46
FIGURE 47
Black Tab
Black Tab Extension
The black scale corresponds with the black tabs.
• The black tab in the middle of the rail can be used for right rip cut 0 inches to 21 inches.
• To use the black scale insert the fence notches into the black tabs on the rail.
• When the fence is inserted into the black tabs, read the black scale.
See Figure 46.
• The black tab in the middle of the rail can be used for right rip cut 0 inches to 21 inches.
• To use the black scale insert the fence notches into the black tabs on the rail.
• When the fence is inserted into the black tabs, read the black scale.
• Extend the extension wing to the right (Maximum 21 inches).
See Figure 47.
37