Chapter 4 Operating ISPSoft
4-23
(5) Click ??? above the contact, type a device address in the box, and press Enter on the keyboard to jump to the next
box in the network. After a device address is typed in the box, you can press Esc on the keyboard to complete the
editing. In this example, X0.0 is typed in the box for the contact, and M0 is typed in the box for the coil.
Additional remark
After you click a network and press Enter on the keyboard, you can edit a box. You can edit the next box in the network
after you press Enter on the keyboard. Besides, the next network is selected after you press Tab on the keyboard. You
can edit a box with the keyboard. After the editing is complete, you can press Enter on the keyboard to jump to the next
box. If you want to end the editing, you can press Esc on the keyboard.
If you have declared symbols, you can click
in a box, or press Page Down on the keyboard when you edit the box.
The symbols on the drop-down list are the symbols which can be assigned to the object. You can select a symbol by the
mouse or the up/down key on the keyboard. Please refer to chapter 6 of ISPSoft User Manual for more information about
symbols.
To Next Page
Loading...
Need help?
General
