Chapter 8 ParametersASDA-A2R Series
Revision December, 2014
8-121
5: 8, O, 1 (MODBUS, ASCII)
6: 8, N, 2 (MODBUS, RTU)
7: 8, E, 1 (MODBUS, RTU)
8: 8, O, 1 (MODBUS, RTU)
P3-03 FLT Communication Error Disposal
Address: 0306H
0307H
Operational
Interface：
Panel / Software Communication
Related Section:
9.2
Default：
0
Control
Mode：
ALL
Unit：
-
Range：
0 ~ 0x1
Data Size：
16bit
Format：
HEX
Settings：
The definition of the setting value is as the following:
0: Warning and keeps running
1: Warning and stops deceleration (The deceleration time is set to
parameter P5-03.B)
P3-04 CWD Communication Timeout
Address: 0308H
0309H
Operational
Interface：
Panel / Software Communication
Related Section:
9.2
Default：
0
Control
Mode：
ALL
Unit：
sec
Range：
0 ~ 20
Data Size：
16bit
Format：
DEC
Settings：
If the setting value is not 0, enable communication timeout
immediately. If it is set to 0, disable the function.
To Next Page
Loading...
