Delta CP2000 Series User Manual

Chapter 7 Optional AccessoriesCP2000
7-86
Assembly for Frame H2 (Straight Stand)
1.
Loosen the 3 screws and remove the cover of conduit box.
2. Remove the 4 covers of conduit box, and fasten the loosen screws back to the original location.
Screw torque: 100–110 kg-cm / [86.7–95.4 Ib-in] / [9.8–10.8 Nm]
3. Remove the parts and screws as below figure shown.

Delta CP2000 Series Specifications

General

Output Voltage	0 ~ Input Voltage
Communication Interface	RS-485
Storage Temperature	-20°C to 60°C
Input Voltage	200-240V AC, 380-480V AC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit