Delta CP2000 Series User Manual

Chapter 11 Summary of Parameter SettingsCP2000
11-2
Pr. Parameter Name Settings Range Default
41: 460V, 160.0 kW
43: 460V, 185.0 kW
45: 460V, 220.0 kW
47: 460V, 280.0 kW
49: 460V, 315.0 kW
51: 460V, 355.0 kW
53: 460V, 400.0 kW
55: 460V, 450.0 kW
57: 460V, 500.0 kW
90: 230V, 3.00 kW
91: 460V, 3.00 kW
92: 230V, 4.00 kW
93: 460V, 4.00 kW
505: 575V, 1.5 kW
506: 575V, 2.2 kW
507: 575V, 3.7 kW
508: 575V, 5.5 kW
509: 575V, 7.5 kW
510: 575V, 11 kW
511: 575V, 15 kW
612: 690V, 18.5 kW
613: 690V, 22 kW
614: 690V, 30 kW
615: 690V, 37 kW
616: 690V, 45 kW
617: 690V, 55 kW
618: 690V, 75 kW
619: 690V, 90 kW
620: 690V, 110 kW
621: 690V, 132 kW
622: 690V, 160 kW
626: 690V, 315 kW
628: 690V, 400 kW
629: 690V, 450 kW
631: 690V, 560 kW
632: 690V, 630 kW
686: 690V, 200 kW
687: 690V, 250 kW
00-01
Display AC motor drive rated
current
Display by models
Read
only
00-02 Parameter reset
0: No function
1: Write protection for parameters
5: Reset kWh display to 0
6: Reset PLC (including CANopen Master Index)
7: Reset CANopen Index (Slave)
9: Reset all parameters to defaults
(base frequency is 50 Hz)
10: Reset all parameters to defaults
(base frequency is 60 Hz)
0

Delta CP2000 Series Specifications

General

Output Voltage	0 ~ Input Voltage
Communication Interface	RS-485
Storage Temperature	-20°C to 60°C
Input Voltage	200-240V AC, 380-480V AC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit