Delta CP2000 Series User Manual

Chapter 14 Fault Codes and DescriptionsCP2000
14-52
ID* Display on LCD Keypad Fault Name Fault Descriptions
170
C/B mismatch
(CBM)
Control board matching error
Action and Reset
Action level N/A
Action time Acts when turning on the drive
Fault treatment parameter N/A
Reset method Cannot reset
Reset condition Cannot reset
Record Yes
Cause Corrective Actions
Incorrect control board
Replace with the correct control board. If the CBM still exists, contact Delta for
further confirmation.

Delta CP2000 Series Specifications

General

Output Voltage	0 ~ Input Voltage
Communication Interface	RS-485
Storage Temperature	-20°C to 60°C
Input Voltage	200-240V AC, 380-480V AC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit