Maintenance
Maintenance Manual 34
Removing a Safety Cover
1. Open the front door. See “Opening a Front Door” on page 20.
2. The securing stoppers are held in place by the screws. Once the screws are removed, the stop-
pers fall off. Start on one side and remove the screws from the securing stopper.
3. Remove the two halves of the stopper and continue with the remaining stopper.
Figure 39. Removing the Extension Rod Stoppers
4. Once the securing stoppers are removed, the safety bracket can be removed. Remove the
screws securing the safety cover.
Figure 40. Removing the Safety Cover Screws
To Next Page
Loading...
