Chapter 5 Parameters|VFD-B-P Series
5-58 Revision April 2009, SW V1.00
the index angle. When the stop command is initiated, the AC motor drive will not decelerate
until the proximity sensor is triggered. After that the AC motor drive begins to decelerate and
stop according to the Pr.04-24 and Pr.04-25.
time between STOP and triggering by proximity
sensor. It depends on the moment the STOP
command is given.
Frequency
Proximity Sensor Actives
Time
Signal of Zero
=Pr.04-25
To Next Page
Loading...
