To Next Page

To Previous Page

Chapter 4 Parameters｜VFD-EL-W

(5) For model VFD055EL43W, when that the ambient temperature is 50°C and the default

carrier frequency is 4 kHz, the drive output current reaches 100% of the rated current. If the

carrier frequency is 12 kHz, the drive output current should be controlled within 40% of the

rated current.

(6) When the ambient temperature is 25°C, the drive is installed independently and the carrier

frequency is 12 kHz, the drive output current reaches 100% of the rated current.

02.04

Motor Direction Control

Default: 0

Settings

0: Enable Forward/ Reverse

1: Disable reverse

2: Disable forward

 Avoid damages to the motor caused by mis-operation leading to the forward and reverse rotation

of the motor.

02.05

Power-On and Run Command Source Changes Motor Drive Operation

Control (external terminal only)

Default: 1

Settings

0: Operates when power-on, remains current running status when the

operation command is changed

1: Do not run when power-on, remains current running status when the

operation command is changed

2: Operates when power-on, runs according to the new operation command

immediately

3: Do not run when power-on, runs according to the new operation

command immediately

Rated current (%)

Carrier Frequency (kHz)

Other models 50°C

All models 25°C

Delta VFD-EL-W Series User Manual

Other manuals for Delta VFD-EL-W Series