Chapter 4 Digital Keypad Operation_VFD-B Series
4-2
Revision 10/2005, BE13, SW V4.08
Display Message Descriptions
Displays the AC motor drive forward run status.
Displays the AC motor drive reverse run status.
The counter value (C).
Displays the selected parameter.
Displays the actual stored value of the selected parameter.
External Fault.
Display “End” for approximately 1 second if input has been accepted by
pressing
key. After a parameter value has been set, the new
value is automatically stored in memory. To modify an entry, use the
, and keys.
Display “Err”, if the input is invalid.
To Next Page
Loading...