Chapter 5 Parameters_VFD-B Series
Revision 10/2005, BE13, SW V4.08 5-23
Output Signal in Zero Speed
Applications Purpose Functions
Related
Parameters
General application
Provide a signal for
running status
When the output frequency is lower than the
min. output frequency, a signal is given for
external system or control wiring.
03-00~03-03
Output Signal at Desired Frequency
Applications Purpose Functions
Related
Parameters
General application
Provide a signal for
running status
When the output frequency is at the desired
frequency (by frequency command), a signal
is given for external system or control wiring.
03-00~03-03
Output Signal for Base Block
Applications Purpose Functions
Related
Parameters
General application
Provide a signal for
running status
When executing Base Block, a signal is
given for external system or control wiring.
03-00~03-03
Overheat Warning for Heat Sink
Applications Purpose Functions
Related
Parameters
General application For safety
When heat sink is overheated, it will send a
signal for external system or control wiring.
03-00~03-03
Multi-function Analog Output
Applications Purpose Functions
Related
Parameters
General application
Display running
status
The value of frequency, output
current/voltage can be read by adding a
frequency meter or voltage/current meter.
03-05
To Next Page
Loading...