Chapter 16 PLC Function ApplicationsC2000 Plus
16-2
16-1 PLC Summary
16-1-1 Introduction
The commands provided by the C2000 Plus's built-in PLC functions, including the ladder diagram
editing tool WPLSoft, as well as the usage of basic commands and applications commands, chiefly
retain the operating methods of Delta's PLC DVP series.
16-1-2 WPLSoft ladder diagram editing tool
WPLSoft is Delta's program editing software for the DVP and C2000 Plus programmable controllers
in the Windows operating system environment. Apart from general PLC program design general
Windows editing functions (such as cut, paste, copy, multiple windows, etc.), WPLSoft also provides
many Chinese/ English annotation editing and other convenience functions (such as registry editing,
settings, file reading, saving, and contact graphic monitoring and settings, etc.).
The following basic requirements that need to install WPLSoft editing software:
Item System requirements
Operating system Windows 95 / 98 / 2000 / NT / ME / XP / 7 / 10
CPU At least Pentium 90
Memory At least 16MB (we recommend at least 32MB)
Hard drive
Hard drive capacity: at least 100MB free space
One optical drive (for use in installing this software)
Display
Resolution: 640×480, at least 16 colors; it is recommended that the screen
area be set at 800×600 pixels
Mouse Ordinary mouse or Windows-compatible device
Printer Printer with a Windows driver program
RS-485 port Must have at least an RS-485 port to link to the PLC
Suitable PLC
models
Delta's full DVP-PLC series, C2000 / C2000 Plus series
To Next Page
Loading...
