41
Information about the guards for each of these headings will be reviewed in the following
pages. The login page of the protection settings is as follows.
Protection Settings Display
In the figure above the 'Change Group ' button is used to change protection settings only in
groups. Group sections to the left of the screen shows the selected group; *cell shows the
active group. When you enter the Protection Settings screen, the Active Group is always
selected first. Look the Main menu > Configuration > Group Settings to change the active
group.
The protection settings refer to the thresholds in the setting screens and how many different
ways the protection can be used.Each threshold can be individually configured; can be
To Next Page
Loading...
Need help?
General
