The D1000
Installation and
Service
Version 2.1
1 5
The D1000 is the rst range hood with an integrated re suppression system. It functions as a standard ventilation
range hood with the added capability to suppress stove top res.
Designed for use over a standard 30” and 36” residential range, it uses a mechanical, commercial style automatic re
suppression system.
Refer to the illustration below to familiarize yourself with the following functions.
• A PLC provides an internal alarm plus connections for up to two external alarms that may go to a local alarm panel
and/or remote location, i.e. the local re department.
• The unit is powered from standard 115 VAC / 60Hz / single phase. A main Power Switch is located at the upper left
of the front surface.
• For normal daily use, the unit provides a fan speed control knob and a light switch for the light.
• A Reset Button (white) is provided to energize the PLC and the main power disconnect contactor (electric range)
or valve (gas stove). Upon initial power up, the control system is not enabled and this reset button needs to be
pressed. In doing so the Status LED below the reset switch will turn from red to green.
Recommended Maintenance Schedule
Monthly Annually Every 10 years
Cleaning
Suppression Nozzles Inspect Inspect
Fusible Links Inspect Replace
Extinguisher Tank Inspect Recertify Replace
Service & Operational Manual
How it works
WARNING: Safety glasses must be worn whenever service operations are performed
Service & Recertication Schedule
To Next Page
Loading...
