Denlar D1000 - Appendix A: NFPA101 F;R Installation

The D1000
Installation and
Service
Version 2.1
A
center
line
Appendix A: NFPA101 F/R Installation
Min Max
D1030 18” 26”
D1036 24” 30”
Installation Heights
Fan Box (NFPA101)
MPK
S.S. Drip Cup
Duct Collar
S.S. Grease Bae
D1000 System
Suppression Tank
Front Grille (-F cal.)
Mounting Bracket
Duct Access (-R cal.)
Safety Key
MPK
The NFPA101 compliant calibration of The
DENLAR D1000 was engineered to comply with
the requirements of the NFPA Life Safety code
related to residential cooking appliances used
in non-production commercial cooking envi-
ronments. Due to the specic performance
requirements in the code, The NFPA101 version
of The D1000 diers slightly from the standard
calibration. Refer to this section for NFPA101
F/R version-specic information.
The NFPA101 versions
of The D1000-F &
D1000-R are identical
barring the -R’s need for
ducting to pass through
the exterior wall. Where
the -R expells vapor
through the rear of
the hood, this version
does not include a front
grille. On this model,
the facia of the fan box
will be a continuous
stainless steel surface.