Why is sound only coming from one channel on my Denon Stereo Receiver?
If sound is only coming from one channel on your Denon Stereo Receiver, it might be due to incomplete connections of the speaker cables. Make sure they are securely connected. Also, check the input/output cables to ensure they are securely connected as well.
Why are the instrument positions reversed on my Denon Stereo Receiver during stereo playback?
If the instrument positions are reversed during stereo playback on your Denon Stereo Receiver, it's likely due to reversed connections of the left and right speakers, or the left and right input/output cables. Check the left and right connections to correct this.
General| Power Output | 75 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
|---|---|
| Component Video Inputs | 2 |
| Digital Audio Inputs | 2 Optical, 1 Coaxial |
| AM/FM Tuner | Yes |
| Dolby Digital | Yes |
| DTS | Yes |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 98 dB |
| Total Harmonic Distortion | 0.08% |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Preset Station Qty | 56 |
| Frequency Response | 10 Hz - 100 kHz |
| Amplifier Output Details | 75.0 Watt - 8.0 Ohm - 20 - 20000 Hz - THD 0.08 % |
| Tuning Range | FM: 87.5 - 108.0 MHz, AM: 522 - 1611 kHz |
| Tuning Display | Fluorescent |
| Connector Type | RCA |
| Speaker Impedance | 6 - 16 Ohm |
| Dimensions | 434 x 151 x 363mm (W x H x D) |
| Channels | 7.1 |
| Weight | 10.5 kg |
Specific warnings about electric shock and fire hazards.
Guidelines for proper operation, temperature, moisture, and handling.
Guidelines for safe installation and handling to prevent damage.
Example diagrams for setting up speaker systems.
Requirements for speaker impedance to ensure proper operation.
Instructions for connecting video sources and displays.
Guide for connecting the unit to a power source.
Choosing audio sources and surround modes.
Selecting audio sources and controlling audio levels.
Guide for connecting external decoders and CD players.
Detailed steps for configuring speaker parameters.
Adjusting audio signal timing based on speaker distances.
Configuring subwoofer operation and frequency range.
Adjusting channel levels for balanced playback.
Assigning digital input terminals to sources.
Configuring automatic surround mode selection.
Adjusting the playback level for external subwoofer inputs.
Utilizing external input terminals for playback.
Managing digital and analog input signal modes.
Using direct, stereo modes and setting up Dolby Pro Logic II.
Adjusting parameters for Dolby Pro Logic II Cinema, Music, and Game modes.
Solutions for common problems like noise and distorted sound.
Troubleshooting steps for display and audio output issues.
Comprehensive table detailing adjustable parameters for various surround modes.
Detailed specifications for audio output, power, dimensions, and remote control.
Specifications related to video inputs and the tuner section.
To Next Page
