ENGLISH
IVideo Conversion Function
s:
t:
:!.
N
o
:l
'"
I
"._-----
Surround back speakers
Center speaker
~-----'---
Surround speakers
Speaker Connections
The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and
a monitor.
Subwoofer
Front speakers
Place
the front speakers to the
sides of the monitor or screen and
as
flush with the screen surface
as
possible.
ISpeaker Installation
Monitor
Video outputs
Video inputs
tal
-----9[>
tal
HOMI connector HDMI connector
Y
PaiC.
PRlC'
Y
PalC.
PRlC.
eee
·
eee
Component video
/'I
Component video
connectors
/'
/ connectors
o · 0
S-Vid,o
;""'"
X
5-Vid,;,",""
Video connector Video connector
[Flow of video signals inside
the
AVR-1708)
'=
I:g~:::u::ne
I quality playback
J1
"'----'J1
1_
J1
r-I=-=---'I~
•
This
function automatically converts various formats of video signals input to the AVR-1708 into the
format used to output the video signals from the AVR-1708 to a monitor.
•
The
AVR-1708's video input/output circuitry
is
compatible with the following four types of video signals:
Digital video signals: HDMI
Analog video signals: Component video, S-Video and Video
• When not using this function, connect a monitor output with the same type of connector
as
the video
input connector.
-N'U-
• HOMI signals cannot
be
converted into analog signals.
• Component input video signals cannot
be
output to anything other than component video connectors.
-
The
table below shows a typical speaker configuration for the AVR-1708.
~
FRONT
CENTER
SURROUND
SURROUND
BACK
SUBWOOFER
L R L
R L
R 1 only
7.1-channels
0 0
0
0
0 0
0 0
(FRONT
A+B)
-
7.1-channels
0 0 0 0 0 0
0
-
0
6.1-channels
0 0 0 0
0
- -
0 0
5.1-channels
0
0
0 0 0
-
- -
0
3.1-channels
0 0 0
-
- -
- -
0
2.1-channels
0 0
- -
- -
- -
0
2-channels
0 0
- -
-
- - -
-
8
To Next Page
Loading...
