Denon AVR-1708 Owner's Manual

- Select" Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based
on the frequency set at "Crossover Frequency" (o::rpage
24).
- When "Front Speaker" is set to "Small': "Subwoofer" is automatically
set to "Yes':
-If "Subwoofer" is set to "No': "Front Speaker" is automatically set to
"Large':
-If "Surround Speaker" is set to "None': "Surround Back Speaker" are
automatically set to "None':
- When using just one surround
back speaker, connect it to the left
channel
(SBL).
- This can be set when system setup menu "Speaker Configuration"
- "Subwoofer"
is set to "Yes':
-
Play music or a movie source and select the mode offering the
strongest
bass.
- Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
[Selectable items]
ILfE (Nofn,al.ll : Play low range and LFE signal of channels set to
"Small':
LFE+Main : Play low range and LFE signal of all channels.
•
Large :Select this when using large speakers with ample low
frequency reproduction capabilities.
Small :Select this when using small speakers without ample low
frequency reproduction capabilities.
None :Select this when no speaker is connected.
Yes :Select this when a subwoofer is connected.
No :Select this when no subwoofer is connected.
Center Speaker
Surround Speaker
Select center speaker use and size.
[Selectable items] lItI1 ~~ III
Subwoofer
Select surround back speaker use and size.
[Selectable items] (~~J~ ~t<~ r-~j)
(rhjlt,j'i 1~l')
Select surround speakers use and size.
[Selectable items] ;~ l)itiit) :~
Surround Back Speaker
Select subwoofer use.
[Selectable items] [!!!] No
~krs 1spkr
Select the number of surround back speakers.
-Nlu •
By default, the AVR-1708's "Amp Assign" setting is set to "ZONE2':To
use as the surround back speaker for the main zone, change the "Amp
Assign" setting (o::rpage
27).
i i __
y !::: =:.
6: Subl.:JOO fe~"
Speaker Configuration
Subwoofer
Mode Setup
Distance
Crossover Frequency
TestTone
In lists of selectable items or adjustable ranges, the item )
surrounded by a border
is the default value.
Example of Display of Default
Values
• ~;.:.. ~peatcer'~Configuration
Select. ~eaker cOnfiguration and siza,
(ba~s,reprodpctioncapabilityt
."Y;'-;~ , .0Y - ,;-:'z, :7,
[Di~aY)h
cl~~-
:,'1 I. 5 p 2" I n 3 = 0 F'
I
[Selectable items] ~ I ,i!~
Front Speaker
ENGLISH
•
Select front speaker size.
[Selectable items] I Large I· Small
IOperations (lI2U"page 22)
23

Denon AVR-1708 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
Equalizer	Yes
HDMI version	1.3a
Product color	Black
Audio decoders	DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx
Apple docking compatibility	iPod
Optical drive included	No
HDMI in	2
Composite video in	4
S-Video inputs quantity	3
Headphone connectivity	6.3 mm
Number of HDMI outputs	1

Weight and Dimensions

Depth	383 mm
Width	434 mm
Height	171 mm
Weight	11100 g