How to fix a Denon AVR-2308 when the display is off?
If the display on your Denon Stereo Receiver is off, check the 'Dimmer' setting and make sure it is not set to 'OFF'. Also, if the PURE DIRECT mode is enabled, select a surround mode other than the PURE DIRECT mode.
How to troubleshoot no sound from speakers on my Denon Stereo Receiver?
If you're not getting any sound from the speakers connected to your Denon Stereo Receiver, start by checking all the connections, including those to the input devices and speaker cables. Ensure that the device you want to play and the selected input source on the receiver match. Adjust the master volume to an audible level and make sure the mute mode is not activated. Disconnect any headphones that might be plugged in. If you're using digital inputs, verify that digital signals are being input and that the input mode is correctly set for the connectors being used.
Why is there no picture with HDMI connections on my Denon AVR-2308 Stereo Receiver?
If you're not getting a picture when using HDMI connections on your Denon Stereo Receiver, first check all the HDMI connections to ensure they are secure. Verify the HDMI input setting is correctly configured. The issue might be that your monitor isn't compatible with copyright protection (HDCP), so try connecting a monitor that supports HDCP. Finally, make sure the HDMI format of the player and monitor are compatible.
What to do if my Denon AVR-2308 isn't responding to the remote control?
If your Denon Stereo Receiver isn't responding to the remote, first replace the batteries with new ones. Ensure you are within the specified operating range and that there are no obstacles between the remote and the receiver. Also, check that the batteries are inserted correctly, matching the polarity marks in the battery compartment. Strong light, like direct sunlight, can interfere with the remote sensor, so move the unit to a less brightly lit area. Finally, ensure the remote ID of the main unit and remote control unit match by setting Remote ID for the main unit to “1”.
Why does my Denon Stereo Receiver power off suddenly and the power indicator flashes red?
The Denon Stereo Receiver might be shutting down due to the activation of the protection circuit. This can happen if the internal temperature rises too high. To resolve this, turn off the receiver, allow it to cool down completely, and then turn it back on. Another cause could be that the core wires of the speakers are touching each other or the set’s rear panel, which also activates the protection circuit. To fix this, unplug the power cord, twist the core wires tightly or terminate the speaker cables, and then reconnect them. Make sure you are using speakers with the specified impedance. If the set is damaged, turn off the power and contact a DENON service center.
Why are HDMI audio signals not output from speakers on my Denon AVR-2308?
If HDMI audio signals aren't being output from the speakers, make sure that the 'Manual Setup' – 'HDMI Setup' – 'HDMI Audio Setup' – 'HDMI Audio Out' setting is set to 'AMP'. If it's set to 'TV', change it to 'AMP'.
Why is no sound produced from the subwoofer of my Denon AVR-2308?
If your subwoofer isn't producing sound, check these things: * Ensure the subwoofer’s power is turned on. * Verify that the 'Subwoofer' setting at 'Speaker Configuration' is set to 'Yes'. If it’s set to 'No', change it to 'Yes'. * Check the connections to the subwoofer to ensure they are properly connected. * Make sure the subwoofer’s volume is not turned off. Adjust the volume to an appropriate level.
Why is there no sound output from the monitor connected with HDMI connections on my Denon AVR-2308 Stereo Receiver?
If you're not getting sound from the monitor connected via HDMI, check that the 'Manual Setup' – 'HDMI Setup' – 'HDMI Audio Setup' – 'HDMI Audio Out' setting is set to 'TV'. If it's set to 'AMP', change it to 'TV'.
Why is no sound produced from my Denon AVR-2308 speakers?
Several factors could be causing the lack of sound from your speakers: * There might be a faulty connection with the input devices or speaker cables. Check all connections. * The selected input source may not match the device you're trying to play. Select the appropriate input source. * The master volume could be set too low. Adjust the master volume to a suitable level. * Mute mode might be activated. Cancel the mute mode. * Headphones could be connected. Disconnect the headphones. * No digital signals are being input. Select an input source for which the digital input setting has been made. * The connectors to which the digital inputs are assigned and the settable input modes do not match. Set the input mode.
Why is there no sound from the surround back speaker on my Denon AVR-2308?
If you're not hearing sound from the surround back speaker of your Denon Stereo Receiver, check that the surround back speaker’s power amplifier is correctly assigned. If the surround back speaker setting is set to 'None', change it to something else. Also, make sure the surround mode is set to a mode that supports 6.1- or 7.1-channel playback.
General| Type | AV Receiver |
|---|---|
| Number of channels | 7.1 |
| Total Harmonic Distortion | 0.08 % |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Tuner Type | AM/FM |
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Component video inputs | 3 |
| Component video outputs | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Video Outputs | composite video x 1, component video x 1 |
| Digital audio inputs | 3 x Optical, 2 x Coaxial |
| Dimensions | 434 x 171 x 414 mm |
| Speaker Impedance | 6-16 Ohm |
Important warnings, safety symbols, and statements of conformity with standards.
Instructions for microphone setup and automatic speaker/room calibration.
Manually setting speaker sizes, distances, and levels.
Configuring HDMI output for audio/video and adjusting audio playback settings.
Adjusting surround sound parameters, tone control, and room EQ.
Steps for turning the unit on/off and choosing an input source.
Setting up the remote to control DENON and third-party audio/video devices.
Solutions for common audio, iPod, video, and picture issues.
To Next Page
