Denon AVR-2309 User Manual

[SOURCE
CONTROL 1]
[1], [2],
[3], [0],
[6 7],
[8 9]
[SOURCE
CONTROL 2]
1
Set [SOURCE CONTROL 1] to “VIDEO”.
2
Set [SOURCE CONTROL 2] to the component to be
registered (TV or SAT/CABLE).
3
Press [MEMORY] and [RETURN] at the same time.
The indicator starts flashing.
4
Input the number of the component you want to set.
No.
CD 1
iPod/NETWORK 2
TUNER 3
DVD/HDP 4
VCR 5
No setting 0
Punch Through Function
“Punch Through” is a function allowing you to operate 1, 2, 3, 0,
6, 7, 8 and 9 on CD, iPod/NETWORK, TUNER, DVD/
HDP or VCR components when in the SAT/CABLE or TV mode. By
default, nothing is set.
[NUMBER]
[RETURN]
[MEMORY]
[Front]
[Rear]

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications

Denon AVR-2309 Specifications

General

Number of Channels	7.1
HDMI Inputs	4
HDMI Outputs	1
Dolby Technologies	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Pro Logic IIx
Auto Calibration	Audyssey MultEQ
Component Video Inputs	3
Analog Audio Inputs	7
Response Bandwidth	10 - 100000 Hz
Signal-To-Noise Ratio	100 dB
THD	0.08%
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Tuner Presets	56
HDMI Switching	Yes
Surround Sound Effects	Yes
Digital Sound Processor (DSP)	Yes
DSP Preset Qty	7
HDMI Pass-Through	Yes
Frequency Response	10 - 100000 Hz
DTS Technologies	DTS-HD Master Audio
Digital Audio Inputs	2 Coaxial
Audio D/A Converter	192kHz/24-bit
Amplifier Output Details	100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.08% - 7 channel(s)